Software-Settings ... HELP

[ArnoNym]

Hi megadrummer,

i have a prob.

build a 10 pad drum machine and connected every pad (has one piezo with two wires of course) with 2 pins of the input connector of the mainboard (synthex v2.8).

now i want to programm the settings of every pad (notenumber, velocity and so on so i can assign my drumsampler-sounds). But i dont know which pad belongs to what channel (i dont mean the midi-channels!!!) or which input-pins of the input-connector of the mainboard belongs to what software channel. i hope u understand waht i mean .....

i connected the 10 pads in that way .....

PIN of Input-Connector My Pad Number

02 PAD 1
06 PAD 1

07 PAD 2
10 PAD 2

08 PAD 3
09 PAD 3

13 PAD 4
12 PAD 4

11 PAD 5
14 PAD 5

15 PAD 6
18 PAD 6

16 PAD 7
17 PAD 7

22 PAD 8
19 PAD 8

20 PAD 9
21 PAD 9

24 PAD 10
25 PAD 10


i need something like "Pin 24+25 of your PAD 10 must configured in the software with the settings of CHANNEL03"

.... which channels (not the midi channels) i have to edit to configure every single pad....

hope you understand what i mean.

thanx for any hint
Nils

[dmitri]

All the pins in the Analogue board schematic, viewtopic.php?p=3438#p3438, have names.
I guess there is a similar description of pins for the Synthex 2.8 PCB.