double (and triple) notes... (help!)

[Vibrafonica]

Hi
I have a megadrum with firmaware 20100613, and I have doing some testing with a
only one piezo electric mic glued on a little piece of wood.
Testing with MIDI-ox every stroke on the piezo in the midi ox monitor I have two and three note on ... I ll post a pic of the screen.
At first I dont need great sensibilty, (I need stroke lightly on piezoelectric)
Anyone can help me?

thanks

[dmitri]

First, upgrade the firmware to the latest version.
After this, if problems persist, possible causes cab be:

1. Bad or incorrect wiring of the piezo to an input.
2. Bad soldering on the board.
3. Incorrect settings.

[Vibrafonica]

thanks Dmitri!

I have to learn and I will try to do!

its a kit purchased to sinthex.

if I modify the curves Can I fixed the problem? wich would work better

thank you very much.

[dmitri]

if I modify the curves Can I fixed the problem?

Curves are not for fixing problems.

[Vibrafonica]

thanks a lot!!!!

with this procedure , that upgrade work fine in my version ????

viewtopic.php?f=3&t=1252

thanks again