Cutting lcd opening
15 posts
• Page 2 of 2 • 1, 2
Re: Cutting lcd opening
by Cladinshadows » Thu Jun 04, 2009 6:20 pm
I cut the opening with my Dremel and a cutoff wheel. Works like a charm.
- Cladinshadows
- Posts: 18
- Joined: Sun Feb 10, 2008 3:58 am
Re: Cutting lcd opening
by kurtus420 » Thu Jun 04, 2009 9:23 pm
my assumption is millimeters?
56 input Megadrum644, Tama Iron Cobra, Taye, Sonor, Roland, Yamaha, Gibraltar, Tascam.
- kurtus420
- Posts: 222
- Joined: Tue May 26, 2009 12:51 am
- Location: Nanaimo, Vancouver Island, Canada
Re: Cutting lcd opening
by kurtus420 » Mon Jun 08, 2009 2:07 am
Hey Synthex, how do I read the side view of this diagram? I want to make standoffs inside of the front plate of my enclosure to mount the lcd display without having to drill the four holes through the faceplate. I'm trying to find the dimension from the front of the pcb to the front of the lcd screen. Thanks Kurt
Synthex wrote:
56 input Megadrum644, Tama Iron Cobra, Taye, Sonor, Roland, Yamaha, Gibraltar, Tascam.
- kurtus420
- Posts: 222
- Joined: Tue May 26, 2009 12:51 am
- Location: Nanaimo, Vancouver Island, Canada
Re: Cutting lcd opening
by gabriel1712 » Tue Jun 09, 2009 9:07 am
kurtus420 wrote:Hey Synthex, how do I read the side view of this diagram? I want to make standoffs inside of the front plate of my enclosure to mount the lcd display without having to drill the four holes through the faceplate. I'm trying to find the dimension from the front of the pcb to the front of the lcd screen. Thanks KurtSynthex wrote:
On the sideview, left is back, right is the front. The plate should be on the inside so you could use double foam tape instead of screws to keep it in place. The dimension your looking for is marked 'T1' ~ 8.5 mm
"the woods are lovely, dark and deep
but I have promises to keep
and miles to go before I sleep..."
but I have promises to keep
and miles to go before I sleep..."
- gabriel1712
- Posts: 195
- Joined: Thu Mar 19, 2009 10:16 pm
- Location: Denmark
Re: Cutting lcd opening
by kurtus420 » Tue Jun 09, 2009 1:29 pm
Thanks gabriel1712, thats exactly what i was looking for. 
gabriel1712 wrote:kurtus420 wrote:Hey Synthex, how do I read the side view of this diagram? I want to make standoffs inside of the front plate of my enclosure to mount the lcd display without having to drill the four holes through the faceplate. I'm trying to find the dimension from the front of the pcb to the front of the lcd screen. Thanks KurtSynthex wrote:
On the sideview, left is back, right is the front. The plate should be on the inside so you could use double foam tape instead of screws to keep it in place. The dimension your looking for is marked 'T1' ~ 8.5 mm
56 input Megadrum644, Tama Iron Cobra, Taye, Sonor, Roland, Yamaha, Gibraltar, Tascam.
- kurtus420
- Posts: 222
- Joined: Tue May 26, 2009 12:51 am
- Location: Nanaimo, Vancouver Island, Canada
15 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 102 guests