www.megadrum.info

Hey guys and girls.
Can anyone help me I trying to track down my triggering issues see previous post.
So I 'm starting from from the ribbon cables to my 3.5mm jacks.
Maybe I have the wiring wrong from misreading the schematic.
So can someone post pics of their ide cabling so I compare yours to mine.
Or a "simple" chart with wires 1 thru 40 and how they are divided up.
Most of the pic in the gallery are unclear.
I'm not using the jacks board but simple wiring the wire directing to the jacks.
Growing desperate thanks in advanced

Make sure you are using a low density 40 wire cable, not the newer 8o wire high density ones.

Yes I am using the low density 40 pin ide cable.

This the way I have mine divided up.
Is this somehow incorrect?

INPUTS Connector :

1 - GND
2 - GND
PAD 1 - 3 - Power source for HiHat controller
4 - HiHat controller input
PAD 2 - Wires 5 and 6
PAD 3 - Wires 7 and 8
PAD 4 - Wires 9 and 10
PAD 5 - Wires 11 and 12
PAD 6 - Wires 13 and 14
PAD 7 - Wires 15 and 16
PAD 8 - Wires 17 and 18
PAD 9 - Wires 19 and 20
21 - GND
22 - GND
PAD 10 - Wires 23 and 24
PAD 11 - Wires 25 and 26
PAD 12 - Wires 27 and 28
PAD 13 - Wires 29 and 30
PAD 14 - Wires 31 and 32
PAD 15 - Wires 33 and 34
PAD 16 - Wires 35 and 36
PAD 17 - Wires 37 and 38
39 - GND
40 - GND

Where did you get this wires numbering/assignment?

From the Components List and Pinouts v2.7.txt
So I take it that this wrong?

I don't know if it's wrong or not. Where did you get this file?

From here its the Components List and Pinouts v2.7 for the 2.7 version of the megadrum.

I still don't see a link from where you got it.

this is ok for synthex kit, not for others
BR
Michal