www.megadrum.info

Hi everybody, i'm new here
A few simple questions about inputs :

Do 1 Stereo input = 2 Mono inputs ?
Are Mono inputs sensitive to piezo velocity ?

About MIDI :
If 1 Stereo MIDI channel = Left and Right.
Is it possible to assign Left->Snare, and Right->Kick ? (for exemple)

Precision, i'd like to build a Megazen (~Zendrum) instrument.
It's why i don't need dual zone sensitives pads (stereo), but mono inputs by hitting bottles tops.

Rmn wrote:Hi everybody, i'm new here
A few simple questions about inputs :

Do 1 Stereo input = 2 Mono inputs ?

Yes.

Are Mono inputs sensitive to piezo velocity ?

Yes.

About MIDI :
If 1 Stereo MIDI channel = Left and Right.
Is it possible to assign Left->Snare, and Right->Kick ? (for exemple)

Yes.

Precision, i'd like to build a Megazen (~Zendrum) instrument.
It's why i don't need dual zone sensitives pads (stereo), but mono inputs by hitting bottles tops.

A few people on this forum actually built such instruments using MegaDrum. You can get 55 mono inputs plus HiHat controller input with MegaDrum.

Thanks for infos !

How should i solver 2 piezo to a stereo jack ?

One piezo goes to the tip and the sleeve, another piezo goes to the ring and the sleeve. The sleeve (ground) is common for both piezos.

Ah, perfect !
That sound logical, but i don't have any electronics knowledge, so i just ask
Now i just have to find a nice case for the DIY zendrum, i'll watch out others threads about building one.
Thanks dmitri !