Arduino based midi drum lights

[jman 31]

I have teamed up with a programmer to develop an Arduino based DIY MIDI light show. It will be ready soon. It has a 16x2 LCD screen with a five button interface much like the Megadrum. It has adjustments for duration, trigger and a choice of one of three colors in each trigger. There are two led driver boards that have a total of fourty lights available. The way it is set up now, there will be 13 triggers with the choice of 3 lights for each trigger. Eventually I would like to incorporate a RGB adjustment to be able to get any hue you want, but that will be done in the programming.

Here is a picture of the first prototype hardware that I designed. The Arduino is the small board plugged in upside down to the mother board. The LED driver board shown in the first picture will drive 12volt LED strands. The standard LED's shown are just for testing purposes. A relay board would be needed to drive mains lighting, which may be in the works.

MIDI Prototype.jpg

[jman 31]

Here is a video of the lights in action. We finally got all of the programming done and have a working prototype.

TRIGGER LIGHTS VIDEO

[StevieG]

I want one

For us less able kind will there be a kit?

I'm an asymbler not an electronic wizard like you guys

[jman 31]

I want one

For us less able kind will there be a kit?

I'm an assembler not an electronic wizard like you guys

Yeah. I am working on a kit right now. I needed a working prototype to make sure all my theories were correct. I am looking for a good PCB manufacturer right now to have the boards made. I will put together a total cost of the kit once I find out how much the boards are going to cost.

[StevieG]

I want one

For us less able kind will there be a kit?

I'm an assembler not an electronic wizard like you guys

Yeah. I am working on a kit right now. I needed a working prototype to make sure all my theories were correct. I am looking for a good PCB manufacturer right now to have the boards made. I will put together a total cost of the kit once I find out how much the boards are going to cost.

Sweet

[jman 31]

You can email me at jer_ulm@yahoo.com if you are interested in one

Here are some 3D renderings of the boards. Main board, LED driver board and Kepad/LCD display board.

[jman 31]

Here are some pics of the power leds at work with Midi Knights. These are some inserts I made for someone that wanted a complete working unit. These are very time consuming to make, but the final outcome is very cool. I took all of the pics with a flash except for the very bright blurry one. That is actual light from the unit.

[jman 31]

Boards are in and I am really happy with the way they came out. I am waiting on one more set of parts and these bad boys can start to go out!!!

Here are some pics. I stuck some components in just to make sure all of the fits were spot on.

[jman 31]

My first complete Midi-Lights module. I have drawn a lot of inspiration from the Megadrum project for the design and implementation of this project. This will work wonderfully with the Megadrum, so some of you might want to include it in your enclosure! I think that I may rehouse my Megadrum with it in a rack mount case at some point.

[jman 31]

Here's a little video I made of the Kit in action. The quality of the video is not very good, but you can get an idea of the capabilities of the module. I finally started sending out kits this week!