Cubase problem -SOLVED

[airflamesred]

I have my keyboard playing an instument and recording in cubase via usb - all is good.
I trigger the same instrument via MD and notice that every note is doubled. I can hear phasing and there are 2 notes on top of each other.
The midi log says only 1 note on and note off.

So, to check, I run a midi cable from the keyboard thru MD and this then records double notes.

I swap the usb cable, no change.

Any ideas anyone?

[airflamesred]

Solved
You have to disable one of the MD ports.

[angr77]

Or set the midi input in Cubase to not receive on all midi channels.... just select the port you want to record...

Angr77