first time user
Re: first time user
by ignotus » Wed May 11, 2011 10:54 am
I haven't tried it with windows but as far as I know it works ok. I think it requires installation of the Jack audio server but the installation of Hydrogen itself guides you through the process and tells you how to configure it.
If it ain't broken... fix it until it is.
- ignotus
- Posts: 882
- Joined: Sat Nov 24, 2007 11:36 am
Re: first time user
by Leon » Thu May 12, 2011 12:34 pm
I know this might sound like a studip question, but I have no Idea how to setup Cubase to use as a drum sampler with megadrum, can I get som advice??
- Leon
- Posts: 40
- Joined: Wed Mar 02, 2011 11:53 am
Re: first time user
by timekeeper » Thu May 12, 2011 2:02 pm
Leon wrote:I know this might sound like a studip question, but I have no Idea how to setup Cubase to use as a drum sampler with megadrum, can I get som advice??
My advice is NOT to mess with something so professional (probably with a stiff learning curve) like Cubase, just to watch Megadrum working. Did you try Hydrogen? Also, these is Toontrack's EZ Drummer. It's quite affordable and really simple. You will need Toontrack's SOLO as a host application which is free.
Going on means going far. Going far means returning...
- timekeeper
- Posts: 136
- Joined: Sun Sep 26, 2010 6:11 pm
- Location: Greece
Re: first time user
by dmitri » Mon May 16, 2011 12:08 pm
Leon wrote:Do I need to have a sound card??
Of course, otherwise where the sound would be coming off.
- dmitri
- Site Admin
- Posts: 8710
- Joined: Fri Aug 03, 2007 8:05 pm
Re: first time user
by Leon » Mon May 16, 2011 1:30 pm
Sure I know that, what I mean is will onboard sound work??
- Leon
- Posts: 40
- Joined: Wed Mar 02, 2011 11:53 am
Re: first time user
by dmitri » Mon May 16, 2011 2:09 pm
Yes, it will work but you may have high latency with it. ASIO4ALL may help to reduce the latency.
- dmitri
- Site Admin
- Posts: 8710
- Joined: Fri Aug 03, 2007 8:05 pm
Re: first time user
by Leon » Fri May 20, 2011 2:20 pm
Thanks Dmitri, I intalled the driver.
But now I am confused alot, I have now realised that I need to have a "Virtual serial port" installed, and the ways it get explained on here is very confusing. Can you shed some light on that subject?
First of all the AVR part, do I need a seperate programmer??
Then the Roland driver, do I need that????
I was under the impression that it was a plug and play device?
Sorry for all the questions, but I am very confused as to setting up everyting.
But now I am confused alot, I have now realised that I need to have a "Virtual serial port" installed, and the ways it get explained on here is very confusing. Can you shed some light on that subject?
First of all the AVR part, do I need a seperate programmer??
Then the Roland driver, do I need that????
I was under the impression that it was a plug and play device?
Sorry for all the questions, but I am very confused as to setting up everyting.
- Leon
- Posts: 40
- Joined: Wed Mar 02, 2011 11:53 am
Re: first time user
by dmitri » Fri May 20, 2011 3:10 pm
You don't need any "Virtual" or Roland drivers. It is a USB MIDI Compliant and all required drivers come with all modern OSs. Once plugged in it is ready to be used by any MIDI aware software.
I have a feeling you are going in circles.
I have a feeling you are going in circles.
- dmitri
- Site Admin
- Posts: 8710
- Joined: Fri Aug 03, 2007 8:05 pm
Re: first time user
by Leon » Mon May 23, 2011 8:47 am
Ok, can someone then go through the whole setup with me (from what drivers I need right dowm to what cables).
- Leon
- Posts: 40
- Joined: Wed Mar 02, 2011 11:53 am
Who is online
Users browsing this forum: Google [Bot] and 46 guests